Teledyne CombiFlash EZ Prep, User Manual

Page: 188 / 245

Section 7 Remote Interfaces
7-3
To access the system, simply open an Internet Browser and
enter the IP address as “http://___.___.___.___”, where the
blanks are replaced by the selected address. The browser
window will load PeakTrak after you enter the address.
7.1.2 Network Printing
The Combi Flash Rf system can print to a network printer and
supports both JetDirect and line printer (LPR) queues.
Consult with your network administrator to determine the IP
address of selected printer. If the printer uses an LPR print
queue, you must also find out the queue name. If the printer
uses a JetDirect print queue, also ask for the port number.
When this information is known, you can proceed with
configuring system for network printing.
1. Select the Tools>Configuration menu command.
2. Select the Network Configuration tab.
3. Follow the on-screen instructions for entering the address
and queue information.
4. Click OK to save the settings. The Combi Flash Rf system
will send a test page to the printer.
After successfully printing a test page, the network printer
will be available for printing using the File>Print menu
command or through the
Automatically Print Report at End of
Run option on the Tools>Configuration User Preferences tab.
7.1.3 Network File Save Configuration
By default, this option is disabled and post-run reports are
automatically saved internally on the Combi
Flash Rf system.
You can recall any run and view it from the system as long as
the .RUN file has not been deleted. To save the post-run report
for viewing elsewhere, you can save the run history as text or
PDF files as needed. This Disabled option is useful when there
is no need, or only an occasional need to save a run history file
externally.
To save all run histories automatically as a text or PDF file,
configure the Network File Save option. This allows the
Combi
Flash Rf system to access the corporate network and
save the file in a selected Network Share folder. Consult with
your network administrator to configure these fields.