AFA4000/2
Airflow Monitor / p.141
10.2
Configuration settings
Note: When you change protocols, power cycle the AFA4000 to make sure that any
changes you make take effect.
The TEL protocol has no adjustable parameters.
Note: Use the
↑
/
↓
buttons to select items or enter values.
1.
From the
Requires set up
screen, press
Mute
, or from the
Run Screen
press and hold
the
Mute
button for 5 seconds until the
Main Menu
is displayed.
2.
Select
Set Up Monitor > Configure
.
3.
Enter the password (the factory default password is 0-0-0-0) and press
Mute
to
continue.
4.
Select
Protocol
, then press
Mute
.
5.
Select
TEL
and press
Mute.
6.
Select
Done
and press
Mute.
To setup the AFA4
000’s MODBUS settings:
1.
From the
Requires set up
screen, press
Mute
, or from the
Run Screen
press and hold
the
Mute
button for 5 seconds until the
Main Menu
is displayed.
2.
Select
Set Up Monitor > Configure
.
3.
Enter the password (the factory default password is 0-0-0-0) and press
Mute
to
continue.
4.
Select
Protocol
, then press
Mute
.
5.
Select
Modbus
, then press
Mute
.
6.
Select
Modbus Settings
and press
Mute.
Parameter
Description
Range
Default
A Slave ID
Set the slave ID
1-255
1
B Baud rate
Set the network Baud
Rate
•
1200
•
9600
•
38400
•
2400
•
14400
•
57600
•
4800
•
19200
9600
C Parity
Set the required
parity
Non/ Even/ Odd
None
Summary of Contents for AFA4000/2
