MagicQ User Manual
306 / 348
41.17.2
Enable remote control
Enables other MagicQ consoles to remote control this console using the MagicQ remote control feature, the iOS/Android appli-
cation, or the MagicWand.
41.17.3
Net Session Mode
Enables network sessions whereby multiple MagicQ consoles can be used on a network together. The options are “None”,
“Manual Takeover” and “Auto Takeover”.
See
Multiple Consoles
for full details on using multiple MagicQ consoles in a network.
41.17.4
Net Session ID
For use in Network Sessions to specify which session MagicQ consoles join. Note that in most situations all MagicQ consoles
will be used in the same session, so the Network Session ID can be set to 0 on all MagicQ consoles.
41.17.5
Hot Takeover Mode
This option is now superceeded by the Network Session Mode. For manual configuration of this option see
Manual Configuration
of Multi Console
.
41.17.6
Hot Takeover Detect Time
When Network Session Mode is set to “Auto Takeover” this specifies how long after a Slave detects that there is no Master on
the network before it takes over control as Master.
41.17.7
Hot Takeover Fade Type
When Network Session Mode is set to “Auto Takeover” this specifies when a Slave becomes a Master whether the output state is
held or whether an automatic fade is carried out to the output of the new Master.
41.17.8
Hot Takeover Fade Time
When Network Session Mode is set to “Auto Takeover” and Hot Takeover Fade Type is set to Automatic then this specifies how
long it takes to fade the output when a Slave becomes a Master
41.17.9
Playback Sync Type
This option is now superseded by the Network Session Mode. For manual configuration of this option see
Manual Configuration
of Multi Console
.
41.17.10
Playback Sync IP
This option is now superseded by the Network Session Mode. For manual configuration of this option see
Manual Configuration
of Multi Console
.
When set to 0 playback sync is accepted from any MagicQ console on the network.