MagicQ User Manual
328 / 348
Table 45.7: Playback
Step through Cue Stack
>
Step back up Cue Stack
pass:[
(also SHIFT + >)]
Go to next step without time
>>
Go back a step without time
<<
Reassert Playback
S + FLASH button
Take manual control of Playback
S + move manual fader
Change chase / FX speed live
S + turn encoder X
Go to Cue ID 2
S 2 ENTER
Release Playback with 3 sec time
S 3 REL
Release all Playbacks
SHIFT + RELEASE
Release all test Playbacks/Cues/Cue Stacks
CTRL + RELEASE
Enter/exit Blind with 3 sec time
3 BLIND
Make Cue Stack default all pages
Change to Page 1, PLAYBACK, <Default Cue Stack>
Table 45.8: Loading Values into the Programmer
Default all attribs
Select heads, LOCATE
Default position attribs
Select heads <POS + LOCATE>
Default colour attribs
Select heads <COLOR + LOCATE>
Default beam attribs
Select heads <BEAM + LOCATE>
Default intensity attribs
Select heads <INT + LOCATE>
Make active all attribs
Select heads, <* + SET>
Make active pos attribs
Select heads, <POS + SET>
Make active colour attribs
Select heads, <COLOR + SET>
Make active beam attribs
Select heads, <BEAM + SET>
Make active int attribs
Select heads, <INT + SET>
Make hard all attribs
Select heads, <* + MOVE>
Make hard pos attribs
Select heads, <POS + MOVE>
Make hard colour attribs
Select heads, <COLOR + MOVE>
Make hard beam attribs
Select heads, <BEAM + MOVE>
Make hard int attribs
Select heads, <INT + MOVE>
Load Cue from Playback
INC <S>
Load Cue ID 2
2 INC <S>
Load Cue at 40%
@ 40 INC <S>
Load Cue at current level
@ INC <S>
Load entire state of Cue Stack
ALL + INCLUDE
Load selected heads from Cue
<* + INC> <S>
Load selected heads pos from Cue
<POS + INC> <S>
Load selected heads colour from Cue
<COLOR + INC> <S>
Load selected heads beam from Cue
<BEAM + INC> <S>
Load selected heads int from Cue
<INT + INC> <S>
Load from DMX
Select heads, <CTRL + INC> ENTER
Snapshot output cues
PROG, <Snapshot>
Snapshot active values
THRU RECORD