MagicQ User Manual
103 / 348
13.2
Intensity View
The Intensity View shows just intensity information for the patched heads enabling a large number of heads to be shown within
the window. Press the VIEW CHANS and VIEW INT soft buttons. Intensity level is shown as a percentage (%).
Use the VIEW HORIZ soft button to change whether heads are shown horizontally or vertically.
The VIEW NAMES soft button allows names to be shown. Deselect this option if you wish to maximise the number of heads
shown in this window or you wish to have a more traditional theatre channel list view.
13.3
DMX Channels View
The DMX Channels View shows the actual values that are being output on the DMX or on the network. Press the VIEW CHANS,
VIEW DMX and VIEW CHANS soft buttons. Note that these values are the real output values – if the output is enabled then
these values will be the values transmitted on the wire. Inversions, merging, and all other modifications are made to the values
before they are displayed in this Window.
Intensity channels are shown in red, position in green, colour in purple and beam in yellow. Channels that are not patched are
shown in grey.
Use the VIEW INPUTS / VIEW OUTPUTS soft buttons to view the DMX / network values that are being received rather than the
ones being transmitted. When viewing the Inputs it is possible to select the VIEW MIN MAX soft button to show the maximum
values received. Deselecting the VIEW MIN MAX resets the view.
