manualshive.com logo in svg

Techni-Lux MagicQ Pro Series, User Manual

The Techni-Lux MagicQ Pro Series boasts advanced lighting control capabilities for professionals in the industry. To maximize your experience with this product, be sure to download the free User Manual from our website. This comprehensive manual offers detailed instructions on how to optimize your lighting performances.

Share
Download
background image

MagicQ User Manual

xviii

26 Network Manager (SnakeSys)

205

26.1 Normal (non ChamNet mode)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

26.2 ChamNet Mode (MQ Net)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

26.3 Upgrading SnakeSys firmware

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

26.4 Older ChamSys 4 Port Ethernet interfaces

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

26.5 Output Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

27 Networking of MagicQ systems

208

27.1 Network addresses and host names

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

27.1.1 Setting IP addresses on a PC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

27.2 Checking IP addresses - Ping Test

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

27.3 Checking consoles on the network

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

27.4 Grabbing shows from other consoles

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

27.5 Zoning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

27.6 Setting up Network Sessions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

27.6.1 Manual Takeover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

27.6.2 Auto Takeover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

27.6.3 Inhibit Outputs

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

27.7 Multi Console Programming

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213

27.7.1 Checking Slave synchronisation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

27.8 Selective Channel Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

27.8.1 Selecting which console controls which channels

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

27.9 Inter Console Messaging

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216

28 Manual configuration of Multi Console operation

217

28.1 Manual configuratuion of Hot take-over

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

28.1.1 Hot Takeover Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

28.1.2 Hot take-over type

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

28.1.3 Swapping control between multiple consoles

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

28.2 Manual configuration of Playback synchronisation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

28.2.1 Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

28.2.2 Configuring which consoles Playback sync to which consoles

. . . . . . . . . . . . . . . . . . . . . . . 220

28.3 Manual configuration of Show Data Synchronisation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

28.4 Manual configuration of Selective Channel Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

28.5 Automatic backing up of shows from other consoles

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Summary of Contents for MagicQ Pro Series


























































































































































































































































































































































































Reviews:

No comments

Related manuals for MagicQ Pro Series

Bamix Mono Instructions For Use Manual preview
Mono
Brand: Bamix Pages: 11
QSC TouchMix Pocket Reference Manual preview
TouchMix
Brand: QSC Pages: 51
Hungry Robot Pedals The Karman Line Manual preview
The Karman Line
Brand: Hungry Robot Pedals Pages: 3
TC Electronic Flashback Mini Delay User Manual preview
Flashback Mini Delay
Brand: TC Electronic Pages: 27
AKG DMM 12BC User Instructions preview
DMM 12BC
Brand: AKG Pages: 79
cecotec 04121 Instruction Manual preview
04121
Brand: cecotec Pages: 52
BYOC Large Beaver Triangle Instructions Manual preview
Large Beaver Triangle
Brand: BYOC Pages: 23
DAPAudio MMIX-4 Manual preview
MMIX-4
Brand: DAPAudio Pages: 15
Samson MDR624 Owner'S Manual preview
MDR624
Brand: Samson Pages: 24
EarthQuaker Devices Disaster Transport SR Operation Manual preview
Disaster Transport SR
Brand: EarthQuaker Devices Pages: 24
SEIKAKU PMG1000 V2 User Manual preview
PMG1000 V2
Brand: SEIKAKU Pages: 11
Velleman HQ POWER VDSM02 User Manual preview
HQ POWER VDSM02
Brand: Velleman Pages: 7
Velleman PROMIX100 User Manual preview
PROMIX100
Brand: Velleman Pages: 12
Audient Sono User Manual preview
Sono
Brand: Audient Pages: 31
Lithium Grim OmniMuff Building Instructions preview
OmniMuff
Brand: Lithium Grim Pages: 10
Menuett 802-534 User Instructions preview
802-534
Brand: Menuett Pages: 22
Wampler Plextortion. Distortion Manual preview
Plextortion. Distortion
Brand: Wampler Pages: 2
Wampler SLOstortion Product Manual preview
SLOstortion
Brand: Wampler Pages: 2

Brands by name

Popular brands

Load more brands