Tabor Electronics 5064, User Manual

Page: 154 / 369

4
ArbConnection
The Control Panels
4-9
Figure 4-4, the Operations Panels
Main
The Main Panel, as shown in Figure 4-5, is the first panel you see
after invoking ArbConnection. Notice how buttons and LED’s are
grouped; this is done specifically so that common parameters are
placed in functional groups. The Main Panel groups allow (from left
to right) adjustment of amplitude and offset, selection of waveform
mode, selection of run mode and control over SYNC and Main
output parameters. Controls, where applicable, are provided for
each channel separately.
Figure 4-5, the Main Panel
If you are connected properly to a PC and ArbConnection has
detected your instrument, then every time you press a button, you
are getting an immediate action on the 2074. It is different if you are
changing parameters on the display; Doing this, you’ll have to press