7
Adjustments and Firmware Update
Channels 1, 2, 3 & 4 Adjustments
7-17
3. Configure the 2074 as follows:
CAL:NUM 24, 60, 96 and 132 – respectively
Adjustment:
4. Adjust CAL:VAL to get the signal of 6 divisions on the screen.
CH1 – Setup 25
CH2 – Setup 61
CH3 – Setup 97
CH4 – Setup 133
60 MHz Amplitude
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100mV
2. Connect the 2074 Channel 1 output to the Oscilloscope input.
Terminate the 2074 output at the Oscilloscope input with the, 50
Ω
, 20 dB Feed through termination
3. Configure the 2074 as follows:
CAL:NUM 25, 61, 97 and 133 – respectively
Adjustment:
4. Adjust CAL:VAL to get the signal of 6 divisions on the screen.
CH1 – Setup 26
CH2 – Setup 62
CH3 – Setup 98
CH4 – Setup 134
70 MHz Amplitude
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 2074 Channel 1 output to the Oscilloscope input.
Terminate the 2074 output at the Oscilloscope input with the, 50
Ω
, 20 dB Feed through termination
3. Configure the 2074 as follows:
CAL:NUM 26, 62, 98 and 134 – respectively
Adjustment:
4. Adjust CAL:VAL to get the signal of 6 divisions on the screen.
CH1 – Setup 27
CH2 – Setup 63
CH3 – Setup 99
CH4 – Setup 135
80 MHz Amplitude
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 2074 Channel 1 output to the Oscilloscope input.
Terminate the 2074 output at the Oscilloscope input with the, 50
Ω
, 20 dB Feed through termination
3. Configure the 2074 as follows:
Summary of Contents for 5064
