Tabor Electronics 5064, User Manual

Page: 52 / 369

1-31
Figure
‎
1-22, 2074 Counter/Timer Menu Example
Figure
‎
1-23, ArbConnection Counter/Timer Panel Example
Output State
The main outputs can be turned on or off. The internal circuit is
disconnected from the output connector by a mechanical switch
(relay). This feature is useful for connecting the main outputs to an
analog bus. For safety reasons, when power is first applied to the
chassis, the main output is always off.
Customizing the
Output Units
There are some parameters that could be customized for easier fit
of the output; These are: horizontal time units, load impedance, 10
MHz reference source and sample clock source. Information on the
customization options is given in chapter 3.