Tabor Electronics 5064, User Manual

Page: 292 / 369

E
r
r
o
r
!
B
o
o
k
m
a
r
k
n
o
t
5-71
SYSTem:IP<ip_adrs>(?)
Description
This command programs the IP address for LAN operation. The programming must be performed from
either USB or GPIB controllers.
Parameters
Name Range Type Description
<ip_adrs> 0 to 255 String Programs the IP address for LAN operation.
Programming must be performed from USB or GPIB
interfaces. Current IP address can be observed on
LAN Properties front panel display.
Response
The 2074 will return the present IP address value similar to the following: 192.168.0.6
SYSTem:IP:MASK<mask_adrs>(?)
Description
This command programs the subnet mask address for LAN operation. The programming must be
performed from either USB or GPIB controllers.
Parameters
Name Range Type Description
<mask_adrs> 0 to 255 String Programs the subnet mask address for LAN
operation. Programming must be performed from
USB or GPIB interfaces. Current subnet mask
address can be observed on LAN Properties front
panel display.
Response
The 2074 will return the present IP address value similar to the following: 255.255.255.0
SYSTem:IP:BOOTp{OFF|ON|0|1}(?)
Description
Use this command to toggle BOOTP mode on and off.
Parameters
Range Type Default Description
0-1 Discrete 0 Toggles BOOTP mode on and off. When on, the IP
address is administrated automatically by the system
Response
The 2074 will return 0, or 1 depending on the present BOOTP setting.