Tabor Electronics 5064, User Manual

Page: 363 / 369

2074
User Manual
A-2
typically with 1 meter coax cables
Sample Clock
Range 1.5 S/s to 200 MS/s, Model 2074;
1.5 S/s to 100 MS/s, Model 1074;
1.5 S/s to 50 MS/s, Model 5064
Resolution 10 digits
Accuracy and Stability Same as reference
10MHz Reference Clock
Standard
≥
0.0001% (1 ppm TCXO) initial tolerance over a 19
°
C to 29
°
C temperature range; 1ppm/
°
C below 19
°
C and above 29
°
C; 1ppm/year aging rate
External
Frequency 10 MHz
Connector Rear Panel SMB
Impedance/Level 10 k Ω
±
5 %, TTL, 50 %
±
2 % duty cycle (factory default); or,
50 Ω
±
5 %, 0 dBm sinewave (Internal jumper setting)
Amplitude Characteristics
Amplitude 20 mV to 20 Vp-p, output open circuit
10 mV to 10 Vp-p, into 50
Ω
Resolution 4 digits
Accuracy (measured at 1 kHz into 50 Ω )
10mV to 99 mVp-p ±(1% of s 5 mV)
100mV to 999 mVp-p ±(1% of s10 mV)
1 V to 10 Vp-p ±(1% of s 70 mV)
DC Offset Range
0 to ±4.995 V
Accuracy ±(1% +1% of amplitude s5 mV)
Resolution 1 mV
Filters
Description Filters can be switch in and out freely except in
standard waveform shape where the filters are
automatically used by the instrument to reconstruct
the sine shape. Each channel has its own set of
filters.
Type 25 MHz Bessel
50 MHz Bessel
60 MHz Elliptic
120 MHz Elliptic
Run Modes
Description Define how waveforms start and stop. Run modes
description applies to all waveform types and
function, except where noted. Continuous
operation is specified across the entire sample
clock frequency range.
Continuous Continuously free-run output of a waveform. Output
can be enabled and disabled from a remote
interface only
Triggered Upon trigger, outputs one waveform cycle. Last