2074
User Manual
7-16
CAL:NUM 21, 57, 93 and 129 – respectively
Adjustment:
4. Adjust CAL:VAL to get the signal of 6 divisions on the screen.
CH1 – Setup 22
CH2 – Setup 58
CH3 – Setup 94
CH4 – Setup 130
35 MHz Amplitude
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 2074 Channel 1 output to the Oscilloscope input.
Terminate the 2074 output at the Oscilloscope input with the, 50
Ω
, 20 dB Feed through termination
3. Configure the 2074 as follows:
CAL:NUM 22, 58, 94 and 130 – respectively
Adjustment:
4. Adjust CAL:VAL to get the signal of 6 divisions on the screen.
CH1 – Setup 23
CH2 – Setup 59
CH3 – Setup 95
CH4 – Setup 131
50 MHz Amplitude
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100
mV
2. Connect the 2074 Channel 1 output to the Oscilloscope input.
Terminate the 2074 output at the Oscilloscope input with the, 50
Ω
, 20 dB Feed through termination
3. Configure the 2074 as follows:
CAL:NUM 23, 59, 95 and 131 – respectively
Adjustment:
4. Adjust CAL:VAL to get the signal of 6 divisions on the screen.
CH1 – Setup 24
CH2 – Setup 60
CH3 – Setup 96
CH4 – Setup 132
50.00001 MHz Amplitude
Equipment: 50
Ω
, 20 dB Feed through termination, Oscilloscope
Preparation:
1. Configure the Oscilloscope as follows:
Input
Impedance:
50
Ω
Range:
100mV
2. Connect the 2074 Channel 1 output to the Oscilloscope input.
Terminate the 2074 output at the Oscilloscope input with the, 50
Ω
, 20 dB Feed through termination
Summary of Contents for 5064
