Tabor Electronics 5064, User Manual

Page: 279 / 369

5-58
Auxiliary
Commands
The auxiliary commands control auxiliary functions that are not
directly related to the main function of the arbitrary waveform
generator however, constitute an important part of operating the
2074. These commands can transform the 2074 into a stand-alone
pulse generator, or counter/timer. Also use these commands to
generate half cycle waveforms. The auxiliary commands are listed
in Table 5-8. Factory defaults after *RST are shown in bold
typeface. Parameter low and high limits are given where applicable
.
Table
‎
5-8, Auxiliary Commands
Keyword Parameter Form Default
Digital Pulse Commands
:AUXiliary
:PULSe
:DELay 0 to 10 0
:DOUBle
[:STATe] OFF | ON | 0 | 1 0
:DELay 0 to 1e3 1e-3
:HIGH 0 to 1e3 1e-3
:LEVel
:HIGH -7.990 to 8 5
:LOW -8 to 7.990 0
:PERiod 64e-9 to 1e6 (64e-9 to 2e6 with the 2 M option) 10e-3
:POLARity NORMal | COMPlemented | INVerted NORM
[:STATe] OFF | ON | 0 | 1 1
:TRANsition
[:LEADing 0 to 1e3 1e-3
:TRAiling] 0 to 1e3 1e-3
Counter/Timer Commands
:COUNter
:DISPlay 0
:MODe NORMal | HOLD NORM
:GATe 0
[:TIMe] 100e-6 to 1 1
:FUNCtion FREQuency | PERiod | APERiod | PULSe | GTOTalize | ITOTalize FREQ
:READ
:RESet
Half Cycle Commands
:HALFcycle
:DELay 200e-9 to 20 1e-6
:DCYCle 0 to 99.99 50
:FREQuency 10e-3 to 1e6 1e6
:PHASe 0 to 360 0
:SHAPe SINusoid | TRIangle | SQUare SIN