Tabor Electronics 5064, User Manual

Page: 24 / 369

1-3
What’s in This
Chapter
This chapter contains a general description of the Model 2074
Waveform Generator and an overall functional description of the
instrument. It also describes the front and rear panel connectors
and indicators.
NOTE
This manual is common to Models 5064, Model 1074 and
Model 2074. Features and functions are described for the
Model 2074 and the variations are described in Appendix
A. The main differences are related to the highest
sampling clock rate and the output frequency. If you
purchased either Model 5064 or Model 1074, refer to the
specifications and ignore references to frequency and
sample clock limits that exceed those which are listed in
Appendix A.
Introduction
Model 2074 is a four-channel, Universal Waveform Generator. It is
a high performance waveform generator that combines four
separate and powerful channels in one small package. Supplied
free with the instrument is ArbConnection software utility, which is
used for controlling the 2074 and for generating, editing and
downloading waveforms from a remote computer. The following
highlights the 2074 and ArbConnection features.
2074 Feature
Highlights

Four output configuration with Independent waveform control

Tight phase offset control between channels (1 point resolution)

16-bit vertical resolution

Generates signals up to 20 Vp-p (into high impedance load)

16-bit LVDS level digital pattern output

2 M memory depth for each channel

200 MS/s sample clock frequency

80 MHz output bandwidth

1 ppm clock stability

Extremely low phase noise carrier

PSK and QAM modulation

Built-in standard waveforms; half-cycle waveforms

Separate sequence generators for each channel