Tabor Electronics 5064, User Manual

Page: 77 / 369

2074
User Manual
3-6
Table -1, Default Conditions After Reset
Function / Parameter
Default Inter-Channel Dependency
Outputs State: Off Separate
SYNC State: Off Common
Operating Mode: Continuous Common
Active Channel: 1 Separate
Digital Pattern State: Off Separate
Output Function: Standard Separate
Output Function Shape: Sine Separate
Standard Wave Frequency: 1 MHz Common
User Wave Sample Clock: 10 MS/s Common
Sample Clock Source & Reference: Internal Common
Amplitude: 5 V Separate
Offset: 0 V Separate
Filter State: Off Separate
Filter Type: Auto Separate
Trigger Slope: Positive Common
Trigger Level: 1.6 V Common
Trigger Source: External Common
Trigger Delay: Off Common
Re-Trigger: Off Common
Modulation State: Off Common
Controlling the
2074
Controlling 2074 function, modes and parameters is simply a matter
of pressing once or twice the appropriate button as described in the
following paragraphs. Refer to Figure 3-2 throughout this
description.
1.
Power Switch
– Toggles 2074 power ON and OFF
2.
Menu Top
– Selects the root menu. This button is disabled
during parameter editing
3.
Menu Soft Keys
– Soft keys have two functions:
1) Selects output function shape or operating mode,
2) Selects parameter to be audited
These buttons are disabled during parameter editing
4.
Menu Back
– Backs up one menu position. This button is
disabled during parameter editing
5.
Cancel (Local)
– Has two functions: