Tabor Electronics 5064, User Manual

Page: 293 / 369

5-72
SYSTem:IP:GATeway<gate_adrs>(?)
Description
This command programs the gateway address for LAN operation. The programming must be performed
from either USB or GPIB controllers.
Parameters
Name Range Type Description
<gate_adrs> 0 to 255 String Programs the gateway address for LAN operation.
Programming must be performed from USB or GPIB
interfaces. Current gateway address can be observed
on LAN Properties front panel display.
Response
The 2074 will return the present IP address value similar to the following: 0.0.0.0
SYSTem:IP:HOSTname<name>(?)
Description
This command programs the host name address for LAN operation. The programming is performed in the
factory and it is highly suggested that users do not change the host name without first consulting a Tabor
customer service person.
Parameters
Name Type Description
<name> String Programs the host name for LAN operation.
Response
The 2074 will return a string containing the host name. String length is 16 characters.
SYSTem:KEEPalive:STATe{OFF|ON|0|1}(?)
Description
Use this command to toggle the keep alive mode on and off. The keep alive mode assures that LAN
connection remains uninterrupted throughout the duration of the LAN interfacing.
Parameters
Range Type Default Description
0-1 Discrete 1 Toggles the keep alive mode on and off. When on, the
2074 constantly checks for smooth LAN connection at
intervals programmed by the syst:keep:time command.
The LAN will be probed as many times as programmed
by syst:keep:prob parameter to check if there is an
interruption
in the LAN communication. When
communication fails, the 2074 reverts automatically to
local (front panel) operation.
Response
The 2074 will return 0, or 1 depending on the present keep alive setting.