ENGINE 3-13
• Turn the crankshaft counterclockwise to bring the “I R” line on
generator rotor to the index mark
A
of the valve inspection
hole and also to bring the camshaft to the position as shown.
NOTE:
At the above condition, the cylinder is at TDC of compression
stroke and also the engraved lines
B
on the camshafts are par-
allel with the mating surface of the cylinder head cover.
• Remove the cam chain tension adjuster cap bolt
3
, spring
4
and O-ring
5
.
• Remove the cam chain tension adjuster
6
and gasket
7
.
• Remove the camshaft journal holders
8
.
NOTE:
Be sure to loosen the camshaft journal holder bolts evenly by
shifting the wrench in the descending order of numbers.
• Remove the dowel pins.
R
EX.
IN.
