8-62 CHASSIS
• When installing the brake light switch, align the projection on
the switch with the hole in the master cylinder.
• When installing the master cylinder
3
onto the handlebar
4
,
align the master cylinder holder’s mating surface
A
with the
punch mark
B
on the handlebar
4
and tighten the upper
holder bolt first.
Front brake Master cylinder holder bolt
(Upper and Lower): 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
3
Master cylinder
4
Handlebar
A
Mating surface
B
Punch mark
C
UP mark
a
Clearance
• Install the brake hose with union bolt and new seal washers.
• After setting the brake hose union to the stopper, tighten the
union bolt
5
to the specified torque.
Brake hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Bleed air from the brake system after installing the master cyl-
inder. (
2-21 to -22)
