9-30 ELECTRICAL SYSTEM
MAINTENANCE
The maintenance comes on to notify engine oil replacement timing. The display comes on at initial 1 000 km
(600 miles) and the display comes on at every time 5 000 km (3 000 miles) thereafter. After the initial 1 000
Km (600 miles) reset, interval can be varied in the range between 500 km (300 miles) to 5 000 km (3 000
miles) with a step of 500 km (300 miles). Reset the display after changing the engine oil to turn off the dis-
play.
To reset the interval:
1) Turn off the ignition switch.
2) Press and hold the SEL button
1
. Turn on the ignition switch and wait for 3 seconds until MAINTE-
NANCE display
3
blinks 3 time sand goes off.
NOTE:
Reset the display after initial engine oil replacement.
To preset the interval:
1) Press and hold the ADJ button
2
for 2 seconds until MAINTENANCE display
3
blinks while ODOME-
TER is displayed.
2) Push the SEL button
1
to decrease interval from 5 000 km (3 000 miles) to 500 km (300 miles) in 500 km
(300 miles) steps.
3) Push the ADJ button
2
to increase interval from 500 km (300 miles) to 5 000 km (3 000 miles) in 500 km
(300 miles) steps.
4) Push and hold the SEL button and ADJ button
2
for 2 seconds.
NOTE:
* The preset interval can be adjusted after odometer reaches 1 000 km (600 miles).
* Reset the display after initial engine oil replacement.
* Reset the display after oil replacement even if the display is not displayed.
