9-16 ELECTRICAL SYSTEM
• Fit the washer
1
to the housing end correctly as shown in the
figure.
• Fit the depression
A
of the starter motor case to the groove
B
of the housing end (outside).
• Align the match mark on the starter motor case with the match
mark on the housing end (inside).
• Apply grease to the new O-ring
2
.
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
• Tighten the starter motor mounting bolt
3
with the battery
-
lead wire
4
. (
10-16)
Starter motor mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Tighten the starter motor lead wire bolt
5
to the specified
torque. (
10-16)
Starter motor lead wire bolt:
2.7 N·m (0.27 kgf-m, 2.0 lbf-ft)
