ENGINE 3-57
Installation
Installation is in the reverse order of removal. Pay attention to
the following points:
• Fit the new gaskets
1
to the oil gallery plugs
2
as shown in
the illustration.
• Tighten the oil gallery plugs
2
to the specified torque.
Oil gallery plug (lower crankcase):
25 N·m (2.5 kgf-m, 18.0 lbf-ft)
• Apply thread lock to the gearshift fork shaft plugs
3
and oil
gallery plug
4
.
99000-32110: THREAD LOCK CEMENT SUPER “1322”
or equivalent
• Fit the gearshift fork shaft plugs
3
and oil gallery plug
4
as
shown in illustration A and tighten them until they are in the
range as shown in illustration B.
1.0 mm
(0.04 in)
Lower crankcase
edge
,
,
2.0 mm
(0.08 in)
Lower crankcase
edge
A
B
When installing a new plug to the new lower crankcase, tighten it by 25 N·m (2.5 kgf-m, 18.0
lbf-ft) and check to ensure that it is within the range as shown in the illustration.
