COOLING AND LUBRICATION SYSTEM 7-15
• Remove the impeller securing bolt
7
by holding the impeller
8
with a water pump pliers.
• Remove the mechanical seal ring
9
and rubber seal
0
from
the impeller.
• Remove the impeller shaft
A
and washer
B
.
• Remove the mechanical seal with the special tool.
09921-20240: Bearing remover set
NOTE:
If there is no abnormal condition, the mechanical seal removal is
not necessary.
• Remove the oil seal
C
.
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.
