8-70 CHASSIS
• Place a clean rag underneath the union bolt
2
on the master
cylinder to catch spilled drops of brake fluid.
• Remove the union bolt
2
and disconnect the brake hose.
• Loosen the lock-nut
3
.
• Remove the master cylinder mounting bolts
4
.
• Remove the master cylinder along with the reservoir by turn-
ing the push rod
5
.
• Remove the reservoir tank
6
and reservoir hose
7
.
• Remove the connector
8
by removing the snap ring
9
.
• Remove the O-ring
0
.
09900-06108: Snap ring pliers (Close type)
• Pull out the dust boot
A
and remove the snap ring
B
.
09900-06108: Snap ring pliers (Close type)
Spilled brake fluid can damage painted surfaces and
plastic parts.
Be careful not to spill any fluid. Wipe spilled fluid up
immediately.
