3-64 ENGINE
Crank pin O.D.
09900-20202: Micrometer (25 – 50 mm)
Bearing thickness
C
Color code
NOTE:
The bearings must be replaced as a set.
CONROD CRANK PIN BEARING AND CONROD
INSTALLATION
• When installing the bearings into the conrod cap and conrod,
be sure to install the tab
A
first, and then press in the other
opposite side of the bearing.
• Apply molybdenum oil to each crank pin and bearing surface.
MOLYBDENUM OIL SOLUTION
• When fitting the conrod cap, make sure that I.D. code
B
on
each conrod faces intake side.
Code
O.D. specification
1
30.992 – 31.000 mm
(1.2202 – 1.2205 in)
2
30.984 – 30.992 mm
(1.2198 – 12202 in)
3
30.976 – 30.984 mm
(1.2195 – 1.2198 in)
Color (Part No.)
Thickness
Green
(12164-39F00-0A0)
1.480 – 1.484 mm
(0.0583 – 0.0584 in)
Black
(12164-39F00-0B0)
1.484 – 1.488 mm
(0.0584 – 0.0586 in)
Brown
(12164-39F00-0C0)
1.488 – 1.492 mm
(0.0586 – 0.0587 in)
Yellow
(12164-39F00-0D0)
1.492 – 1.496 mm
(0.0587 – 0.0589 in)
Be sure to clean the conrod big end.
