ENGINE 3-73
• Match the upper and lower crankcases.
NOTE:
Align the gearshift forks
1
with their grooves
2
.
• Fit the new gasket washers to the bolts 5 to 8 numbers.
• Tighten the crankshaft journal bolts (M:8) in ascending order
of numbers assigned to these bolts. Tighten each bolt a little
at a time to equalize the pressure in the following two steps.
Crankshaft journal bolt:
(M:8) Initial : 15 N·m (1.5 kgf-m, 11.0 lbf-ft)
Final : 26 N·m (2.6 kgf-m, 19.0 lbf-ft)
• Fit the new gasket washer
A
and clamp
B
to the crankcase
bolt.
• Tighten the crankcase bolts a little at a time to equalize the
pressure.
Crankcase bolt: (M:6): 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
(M:8): 26 N·m (2.6 kgf-m, 19.0 lbf-ft)
1
2
3
4
5
6
7
8
