3-88 ENGINE
• Place the cylinder head
4
on the cylinder.
NOTE:
When installing the cylinder head, keep the cam chain taut.
• Apply engine oil to the washers
A
and thread portion of the
bolts before installing the cylinder head bolts.
• The conical curve side of washers
A
faces upside.
• Tighten the cylinder head bolts to the specified torque and
diagonally.
Cylinder head bolt: 25 N·m (2.5 kgf-m, 18.0 lbf-ft)
• Tighten the cylinder side bolts
5
to the specified torque.
Cylinder side bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Apply engine coolant to new O-ring
6
of water inlet connector
7
.
• Install the cam chain tensioner
8
on the cylinder head.
• Tighten the cam chain tensioner bolts
9
to the specified
torque.
Cam cain tensioner bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
