3-54 ENGINE
GEARSHIFT FORK AND GEARSHIFT CAM
Installation
• Apply a small quantity of thread lock to the gearshift arm stop-
per
1
and tighten it to the specified torque.
09900-32030: THREAD LOCK CEMENT SUPER “1303”
or equivalent
Gearshift arm stopper: 19 N·m (1.9 kgf-m, 13.5 lbf-ft)
• Install the gearshift cam
2
with the bearing
3
fitted.
NOTE:
The stamped mark side of the gearshift cam bearing faces out-
side.
• Install the gearshift forks and their shafts as shown.
4
For 3rd/4th drive gears
5
For 5th driven gear
6
For 6th driven gear
• Apply a small quantity of thread lock to the bearing retainer
screws
7
.
• Install the gearshift cam bearing retainer No.1
8
and No.2
9
.
• Tighten the bearing retainer screws
7
to the specified torque.
99000-32110: THREAD LOCK CEMENT SUPER “1322”
or equivalent
Shift cam bearing retainer screw:
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
