FUEL SYSTEM AND THROTTLE BODY 5-17
THROTTLE BODY INSTALLATION
Install the throttle body assembly in the following points:
1) Install the throttle body assembly
1
into the intake pipes
2
.
NOTE:
Never tighten the intake pipe clamp screws
3
.
2) Install the air cleaner box
4
to the throttle body assembly
1
.
3) Tighten the outlet tube clamp screws
5
and then intake pipe
clamp screws
3
. (
10-18)
4) Tighten the air cleaner box mounting bolts to the specified
torque. (
10-18)
Air cleaner upper mounting bolt
A
:
10 N·m (1.0 kgf-m, 7.0 lbf-ft)
Air cleaner lower mounting bolt
B
:
5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
5) Connect the throttle pulling cable
6
and throttle returning
cable
7
to the throttle cable drum. (
10-17)
6) Tighten the throttle cable nuts
8
to the specified torque.
Throttle cable nut: 4.5 N·m (0.45 kgf-m, 3.0 lbf-ft)
7) Adjust the throttle cable play. (
2-13)
NOTE:
* Adjust the TP sensor when it was removed. (
4-19)
* Reset the ISC valve and TP sensor when they were removed.
(
5-21 and 5-22)
8) After adjusting the throttle cable play, reinstall the removed
parts.
