Suzuki GW250, Service Manual, Page: 119 / 478

ENGINE 3-71
TRANSMISSION
• Install the bearing pins
1
and the C-rings
2
on the upper
crankcase.
• Install the countershaft assembly to the upper crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Install the driveshaft assembly to the upper crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Turn the bearings to fit the bearing dowel pins
A
in the
respective positions.
• Install the oil seal
3
.