3-80 ENGINE
• Install the gearshift shaft assembly
7
with the washer
8
.
NOTE:
Pinch the gearshift arm stopper
9
with return spring ends
D
.
• Install the washer
0
and new snap ring
A
.
09900-06107: Snap ring pliers (Open type)
OIL PUMP
• When install the oil pump
1
, fit the convex part
A
of the oil
pump shaft onto the concave part
B
of the water pump shaft.
• Apply thread lock to the oil pump mounting bolts
2
and
tighten them to the specified torque.
99000-32110: THREAD LOCK CEMENT SUPER “1322”
or equivalent
Oil pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Install the pin
3
.
NOTE:
Be careful not to drop the pin
3
into the crankcase.
• Install the thrust washer
4
.