manualshive.com logo in svg

Sun Microsystems UltraSPARC-I, User Manual, Page: 156 / 410

Share
Download
Sun Microsystems UltraSPARC-I User Manual Download Page 156

Sun Microelectronics

141

7. UltraSPARC External Interfaces

7.17.2 Packet Description

7.17.2.1 Master ID (MID)

MID is a 5-bit field. It identifies the source Interconnect master port that made
this request. MasterID is the same as the port_ID bits. SC can be useMID to main-
tain ordering for transactions with the same MID, and to parallelize requests with
different MIDs.

If the system forwards the request to a slave UltraSPARC for proxy execution, the
slave maintains the MID and returns it to SC in the P_REPLY packet.

7.17.2.2 Transaction Type

This 4-bit field encodes the transaction type, as shown in Table 7-37.

7.17.2.3 Class

The Class bit identifies which of the two master Class queues the request has
been issued from. The system must maintain strong ordering between transac-
tions with the same Class bit and MID field.

Table 7-37

Interconnect Transaction Type Encoding

Transaction Type

Name

Type

P_RDS_REQ

ReadToShare

 0000

P_RDSA_REQ

ReadtoShareAlways

 0001

P_RDO_REQ

ReadToOwn

 0010

P_RDD_REQ

ReadToDiscard

 0011

S_CPB_MSI_REQ

CopybackGotoSstate

 0100

P_NCRD_REQ

NonCachedRead

 0101

P_NCBRD_REQ

NonCachedBlockRead

 0110

P_NCBWR_REQ

NonCachedBlockWrite

 0111

P_WRB_REQ

Writeback

 1000

P_WRI_REQ

WritebackInvalidate

 1001

S_INV_REQ

Invalidate

 1010

S_CPB_REQ

Copyback

 1011

S_CPI_REQ

CopybackInvalidate

 1100

S_CPD_REQ

CopybackToDiscard

 1101

P_NCWR_REQ

NonCachedWrite

 1110

P_INT_REQ

Interrupt

 1111

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for UltraSPARC-I



























































































































































































































































































































































































































Reviews:

No comments