Product description
28
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
Type
Verti-Mix Double
Tyres
Unit
1501 D
1801 D
2401 D
3101 D
Tandem axle
10.0/75-15.3 (18 PR)
bar
--
7.0
--
--
400/60-15.5 (18 PR)
bar
--
6.0
6.0
--
435/50 R 19.5
bar
--
--
9.0
9.0
Tab. 9
2.7
Required tractor equipment
The employed tractor must meet the following requirements, in order to ensure correct use of the
machine:
Tractor engine output
For the necessary power required, please refer to chapter "Technical data", page 18.
Electrical system
Battery voltage:
12 V (volt)
Socket for lighting:
7-pole
Socket for control set:
3-pole (DIN 9680). The feed line of the 3-pole socket should
have a minimum cable cross section of 4 mm².
Hydraulics
Check the compatibility of the hydraulic oils before connecting
the machine to the hydraulic system of your tractor. For details
about checking the compatibility of the hydraulic oils, contact
your agricultural machinery dealer if necessary.
Do not mix mineral oils with bio oils.
Maximum operating pressure:
210 bar
Delivery rate of hydraulic pump
min. 25 l/min and max. 45 l/min at 180 bar
Hydraulic oil of machine:
ATF Hydraulic oil
Depending on their function, the hydraulic components can be
connected to:
a double-acting control device,
a single-acting control device and a depressurised return line
leading directly into the hydraulic oil tank of the tractor.
Given a free choice, we recommend a single-acting control device
and a depressurised return line. The hydraulic oil flows back into the
hydraulic oil tank of the tractor through the free return line with a low
back pressure. Thus, a free return line reduces heating-up of the
hydraulic oil.
