Commissioning
86
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
Release parking brake
Ensure that the cable does not rest on or chafe against other vehicle
components.
With the parking brake released, the cable shall slightly sag.
1. Swivel the crank handle (1) from resting position (3) by 180° to adjusting position (2).
2. Turn the crank handle anticlockwise until the cable (5) is relieved.
The parking brake is released.
3. Swivel the crank handle to resting position.
Apply parking brake
Correct the setting of the parking brake if the tension path of the
spindle (4) is no longer sufficient.
1.
Swivel the crank handle (1) from resting position (3) by 180° to adjusting position (2).
2.
Turn the crank handle clockwise.
→
The parking brake is applied via the cable (2).
5.10
Hitch and unhitch machine
Additionally observe the information in the chapter "Basic safety
instructions", page 35, when hitching and unhitching the
machine.
Check the machine for visible defects during each hitching and
unhitching procedure. Observe the information in the chapter
"
Operator’s obligation", page 32.
WARNING
Risk to people of being crushed due to the tractor and the
machine accidentally starting or rolling when hitching or
unhitching the machine!
Only hitch or unhitch the machine after the tractor and the machine
have been secured against accidental starting and rolling.
Observe the information in the chapter "Secure tractor and machine
against accidental starting and rolling", page 62.
5.10.1
Hitch machine
WARNING
Risk due to incorrect use of the tractor if the attached/ hitched
machine causes insufficient stability or insufficient steerability
and braking ability of the tractor!
Only attach/hitch the machine to appropriate tractors. Observe the
information in the chapter "
Check tractor’s compatibility", page 58.
