Service and maintenance of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
123
WARNING
Risk of crushing, shearing, cuts, amputation, becoming
entangled, wound up, being drawn in and risk of impact to
people if:
lifted, unsecured machine parts accidentally come down or
are unintentionally lowered,
tractor and machine accidentally start and roll!
Secure lifted machine parts against accidental lowering before
working beneath lifted parts.
Secure tractor and machine against accidental starting and
rolling before carrying out any service or maintenance work on
the machine.
Wait for the machine to stop completely before entering the
hazardous area of the machine.
WARNING
Risk to people of being crushed, drawn in and becoming
entangled due to unprotected powered driving elements during
machine operation!
Start the machine only with the protective devices completely
mounted.
It is not allowed to open protective devices:
when the machine is powered,
as long as the tractor engine is running with the propeller
shaft coupled/the hydraulic system connected,
if the ignition key is in the tractor and the tractor engine can
be accidentally started with the propeller shaft coupled/the
hydraulic system connected,
if tractor and machine have not been secured against
accidental rolling by means of their respective parking
brake and/or the chocks.
Close open protective devices before powering the machine.
WARNING
Dangerous situations may occur if load-bearing parts break due
to mechanical work on frame elements!
As a basic principle, the following is not allowed:
drilling at the frame or chassis,
boring up of existing holes at the frame or chassis,
welding on load-bearing parts.
9.1
Enter the mixing container
Shop work
You will have to enter the mixing container, e.g. to carry out maintenance work on the cutting knives of
the mixing auger(s).
