Commissioning
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
89
●
Only authorised and qualified staff is allowed to mount the
container extension!
●
The manufacturer will not assume any warranty and liability for
material damage and personal injuries if the work is carried out
by insufficiently qualified staff.
●
Only use original Strautmann spare parts.
Risk of damage to the machine due to overload caused by filling too
much mass into the mixing container due to a non-approved
extension! Exclusively use approved extensions.
The maximum extension height is 360 mm, only 180 mm on
the Verti-Mix 1451!
Combining different extensions is not allowed!
Observe the fact that the container extension increases the
vehicle height. Observe the information in the
chapter
"Technical data", page 18
5.12
Set conveyor speed
The conveyor speed for the crossover conveyor / C-conveyor / discharge conveyor for side discharge
is infinitely adjustable.
The set conveyor speed determines the lateral delivery distance (throwing range) of the fodder next to
the machine. An increasing conveyor speed results in a larger lateral delivery distance of the fodder.
The conveyor speed is infinitely adjusted at the current regulation valve:
manually directly on the machine,
by remote control via the control set from the tractor.
The set scale value is not an absolute value for the conveyor speed, but only a reference
value. Depending on the tractor model, the set conveyor speed may differ even if the scale
value is identical.
5.12.1
Manual setting of conveyor speed
Set the conveyor speed directly on the machine
via the rotary knob (1) at the current regulation
valve (2). Position (3) indicates the scale value
for the set conveyor speed.
Scale value 0 = lowest conveyor speed,
Scale value 10 = highest conveyor speed.
Fig. 50
