Service and maintenance of machine
152
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
Check the distance between underride guard and road after each tyre
change! The distance must not exceed 550 mm.
Change the position of the underride guard if the distance is more
than 550 mm.
1. Place the lifting device at the marked fixing
points.
Fig. 110
2. Keep to the specified order when loosening
and tightening the wheel nuts.
3. Tighten the wheel nuts at the required
tightening torque.
4. Check the wheel nuts for tightness after
10 service hours. Retighten wheel nuts if
necessary
Fig. 111
9.17
Brake system and chassis
9.17.1
Check/Clean in-line filters of compressed-air brake system
The in-line filters incorporated in the hose couplings of the brake and
feed line protect the compressed-air brake system from being soiled
by solid particles.
The air supply to the brake system should have priority over the
protection of the brake system against soiling and shall be ensured in
all conditions. In case of the filter element being clogged due to
soiling, an internal bridging-over element opens and unfiltered air
passes through the hose coupling.
Regularly check the degree of soiling of the filter elements in the
hose couplings.
Clean heavily soiled filter element approx. every 3-4 months,
depending on the operating conditions.
Replace damaged filter elements.
