Use of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
111
Optional extra
The counter-cutters (1) may be equipped with a
hydraulic cylinder (2).
The hydraulic cylinders:
●
enable the remotely controlled extension
and retraction of the counter-cutters,
●
enable the extension of the counter-cutters
into the mixing container in 4 possible
positions by placing the bolt (3)
respectively.
The counter-cutters are extended and retracted
via remote control from the tractor. Depending on
the machine's equipment:
●
directly via a double-acting control device
of the tractor,
●
via the Bowden cable control set,
●
via the E-control set.
Fig. 67
7.3
Fodder discharge
The discharge door must be completely opened when
discharging very dry, long and highly-structured fodder.
The discharge door must be opened according to the desired
discharge quantity when discharging strongly pourable fodder.
When discharging the fodder, the 750 p.t.o. shaft can be used (if
available) and the tractor engine can be run at reduced speed.
Increase the driving speed of the mixing auger (gear level I or
p.t.o. shaft speed 1000 min
-1
) for a short time towards the end of
the discharging process to throw off any fodder residues from
the mixing auger and to completely empty the mixing container.
inhi
The opening width of the dosage gate is indicated on the scale at
the dosage gate.
●
Scale value 0: Dosage gate is closed. No fodder discharge.
●
Scale value 7: Dosage gate is completely open. Maximum
fodder discharge.
