Loading of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
53
4
Loading of machine
Only the haulage contractor is authorised to carry out this work!
This work requires special know-how and/or specific technical
equipment.
Otherwise, this work will impair your safety and the functional ability
of the machine during and after its execution.
Lashing points on the machine for fixing lashing
equipment are identified by the pictograph
(Fig. 25).
Fig. 25
Loading and unloading by means of tractor
WARNING
Risk to people due to uncontrolled movements of the tractor and
the machine if insufficient stability and insufficient steerability
and braking ability of the tractor occur!
Properly hitch the machine to the tractor before loading or
unloading the machine onto or from a transport vehicle.
When hitching and transporting the machine for loading and
unloading, only use a tractor which meets the performance
requirements and can safely slow down the machine..
If the machine is equipped with a compressed-air brake system,
you are only allowed to start moving the machine when the
pressure gauge on the tractor indicates 5.0 bar.
Loading and unloading by means of lifting equipment (for lifting into containers)
DANGER
Risk of fatal crushing and/or impact to people if the lifted
machine accidentally comes down!
Never stand within the lifting zone beneath the lifted machine.
Only use authorised, sufficiently dimensioned slings free of
damage which are able to safely carry the machine's weight.
Check the slings before each loading and unloading of the
machine for possible damage and replace them if necessary.
It is imperative to use the marked fixing points when fixing slings
for loading and unloading of the machine by means of a lifting
device.
Use an appropriate crane system, a suitable lifting equipment
and have the loading and unloading procedure carried out by
qualified staff.
