Service and maintenance of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
159
9.17.9
Check clearance of wheel hub bearing
WARNING
Risk of injury due to movements of tractor and machine or
machine parts!
Secure tractor and machine against accidental starting, rolling and
before carrying out any work on the machine!
Make sure that people leave the hazardous area of the tractor and
the machine or of movable machine parts!
1.
Lift the axle until the tyres are free.
2.
Release the brake.
3.
Place two levers between tyres and ground
and check the bearing clearance.
If there is a noticeable bearing clearance,
have it readjusted (shop work!).
Fig. 119
9.17.10 Check brake linings
WARNING
Risk of injury due to movements of tractor and machine or
machine parts!
Secure tractor and machine against accidental starting, rolling and
before carrying out any work on the machine!
Make sure that people leave the hazardous area of the tractor and
the machine or of movable machine parts!
1. Open the inspection hole (3) by pulling out
the rubber plug (if available).
Have the brake linings replaced (shop
work!) in case of a remaining lining
thickness of:
5 mm (riveted linings)
3 mm (N 2504 linings)
2 mm (glued linings).
2. Reinsert the rubber plug after the check.
Fig. 120
