Safety instructions
34
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
In these operating instructions, activity-related safety instructions mark the existing residual risks.
Risks may arise:
due to work-related movements of the machine and its working tools,
due to substances or foreign objects blown out of the machine,
due to accidental lowering of the lifted machine/of lifted machine parts,
due to accidental starting and rolling of the machine / of tractor and machine.
Dangerous spots exist:
within the drawbar area between tractor and machine,
within the area of the powered propeller shaft,
within the area of the discharge openings,
within the area of the powered discharge conveyor, crossover conveyor or conveyor extension,
in the mixing container with the machine powered or not powered,
around the discharge pipe and in ejection direction in case of machines equipped with straw
blower.
3.4.2
Safety-conscious operation of machine
The machine is only allowed to be operated from the driver’s seat of the tractor, provided that no
people are within the machine’s hazardous area. Observe the information in the chapter "Hazardous
areas and dangerous spots", page 33.
3.4.3
Safety and protective devices
Only operate the machine when all safety and protective devices are properly fixed and in fully
operable condition.
Defective or removed safety and protective devices might cause dangerous situations.
Check all safety and protective devices for visible damage and functional ability before starting
the machine.
3.4.4
Structural alterations
Vehicles provided with an official operating license or vehicle-linked devices and equipment
provided with an official operating license or a road traffic license according to the road traffic
regulations must be in the condition specified by that license.
You are only allowed to carry out structural alterations, extensions or modifications on the
machine with the prior written consent of the manufacturer.
In case of non-authorized structural alterations, extensions or modifications:
the declaration of conformity and the CE symbol of the machine will become invalid,
the operating license according to national and international regulations will become invalid.
Exclusively use original parts or modification and accessory parts approved by the manufacturer
such that:
the declaration of conformity and the CE symbol of the machine will remain unaffected,
the operating license according to national and international regulations will remain
unaffected,
perfect functioning of the machine will be ensured.
The manufacturer will not assume any liability for damage resulting from:
