Service and maintenance of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
131
The drain valve opens and the gear
lubricant oil drains off into the drip tray.
11. Wait for the oil to stop draining off
through the oil drain hose.
12. Connect a filling pump to the oil drain
hose.
13. Fill gear lubricant oil (see Quantities
when filled and change intervals, p. 128)
through the filling pump into the mixer
gearbox until the gear lubricant oil pours
via the connector (
Fig. 76
/4) into the
compensating reservoir (
Fig. 76
/1) and
the oil level is visible between the two
markings (Fig. 76/2) of the
compensating reservoir.
Fill the gear lubricant oil slowly
into the mixer gearbox, in order
to avoid formation of bubbles.
In case of bubbles forming, the
mixer gearbox cannot be filled
with the required quantity of
gear lubricant oil.
Fig. 78
14. Unscrew the oil drain hose from the oil
drain plug.
15. Disconnect the filling pump from the oil
drain hose.
16. Screw the cap (Fig. 77/5, Fig. 78/5) onto
the drain valve.
17. Screw the vent screw (Fig. 76/3) again
onto the vent opening of the
compensating reservoir (Fig. 76/1).
18. Carry out a test run for several minutes.
19. Check the oil level in the compensating
reservoir afterwards.
20. Fill gear lubricant oil through the vent
opening (Fig. 76/3) into the
compensating reservoir if necessary.
Check the oil level in the mixer
gearbox several times during the
first 10 service hours after
changing the gear lubricant oil.
