Use of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
113
WARNING
Risk of crushing, shearing, cuts, amputation, becoming entangled,
wound up, being drawn in and risk of impact to people if:
lifted, unsecured machine parts accidentally come down or are
unintentionally lowered , e.g. an open discharge door,
the machine is unintentionally started or rolls accidentally.
Secure lifted machine parts against accidental lowering before working
beneath lifted parts.
Secure the machine against accidental starting and rolling before
eliminating any blockages on the machine.
Wait for the machine to stop completely before entering the hazardous
area of the machine.
1. Switch the p.t.o. shaft off.
2. Completely open the discharge door of the clogged discharge opening if necessary.
3. Secure tractor and machine against accidental starting and rolling, observe the information in the
chapter "
Secure tractor and machine against accidental starting
and rolling", page 62.
4. Eliminate the blockage such that the discharge opening gets free and the mixed materials can be
easily discharged again.
5. Start the tractor engine.
6. Close the discharge door.
7. Switch the p.t.o. shaft on.
8. Power the mixing auger at the desired driving speed.
9. Open the discharge door at the desired opening width and continue the fodder discharge.
7.4
Working with the straw blower
Optional extra
Bulk straw or straw bales are filled into the
mixing container, chopped and blown into the
stable by means of the straw blower.
Fig. 68
