Service and maintenance of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
145
9.12.3
Clean C-conveyor
1. Secure tractor and machine against
accidental starting and rolling. Observe the
information in the chapter "Secure tractor
and machine against accidental starting and
rolling", page 62
2. Move the C-conveyor to the side until it
slightly rises.
3. Unscrew the two nuts (1) at the cover (2) of
the cleaning aperture.
4. Remove the cover (2) of the cleaning
aperture by displacing the two nuts (1) in
relation to each other.
Fig. 103
5. Now remove the deposits on the interior of
the C-conveyor (3) or the toothed belt (4)
manually or by means of a vacuum cleaner
or appropriate equipment. Make sure to
avoid damage to the C-conveyor or the
toothed belts!
Fig. 104
6. Remove material deposits on the driving
and return rollers of the toothed belts in the
interior of the C-conveyor by means of an
appropriate tool (e.g. thin screwdriver)
through the slots (5) in the frame.
Fig. 105
7. The outer lower and upper return rollers (6)
are accessible from the outside.
8. Close the cleaning aperture again by
means of the cover (2) after cleaning.
Fig. 106
