Operation
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
95
6
Operation
Depending on the machine’s equipment, actuation of the machine’s hydraulic and electrical function(s)
is effected via remote control from the tractor:
●
via direct tractor connection (standard equipment)
●
via Bowden cable operation (optional extra)
●
via electro-hydraulic operation (E-control) (optional extra)
●
via the weighing and control set (Multiscale) (optional extra)
The actuating speed of the hydraulic functions (hydraulic
components) depends on the tractor's hydraulic system.
Depending on the tractor model, a correction of the set actuating
speeds at the tractor's control device / the machine's control
block may be necessary.
For information about the required control devices, please refer
to the chapter "Required tractor equipment“ on page 29.
6.1
Direct tractor connection
The individual hydraulic components of the machine are directly connected to the hydraulic system of
the tractor via appropriate hydraulic hose pipes for oil supply.
A double-acting control device is required on the tractor for each function (hydraulic component) of the
machine.
Each individual function of the machine is then actuated from the tractor via the operating element on
the appropriate control device.
6.2
Bowden cable control set
The individual hydraulic components of the
machine are connected to a control block. To
ensure the oil supply, the control block is
connected to the hydraulic system of the tractor
via a double-acting control device or a single-
acting control device and a free return line.
If the machine is equipped with an on-board
hydraulic system, it is not necessary to connect
the machine to the hydraulic system of the
tractor.
The Bowden cable control set serves to actuate
the hydraulic functions of the machine from the
tractor if the oil circulation between tractor and
machine has been switched on via the control
device on the tractor.
One operating element is required for each
function of the machine.
The Bowden cable control set
is mounted on the tractor within view and
easy reach of the operator,
is equipped with one or several operating
element(s).
The operating elements are in touch-control or in
Fig. 60
