Commissioning
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
83
WARNING
Risk of crushing, cuts, becoming entangled, being drawn in and
risk of impact to people if the machine rolls due to the service
brake system being released!
Always connect the hose coupling of the brake line (yellow) first and
then the hose coupling of the feed line (red).
The machine's service brake system immediately comes off the brake
position if the red hose coupling is connected.
1. Open the caps of the hose couplings on the tractor.
2. Remove the hose coupling of the brake line (yellow) from the blank connection.
3. Clean soiled sealing rings or replace damaged sealing rings.
4. Properly fix the hose coupling of the brake line (yellow) to the yellow marked coupling device at
the tractor.
5. Remove the hose coupling of the feed line (red) from the blank connection.
6. Clean soiled sealing rings or replace damaged sealing rings.
7. Properly fix the hose coupling of the feed line (red) to the red marked coupling device at the
tractor.
8. Use the brake pressure regulator to adapt the braking effect of the service brake system to the
current loading condition of the machine.
9. Release the parking brake of the machine and / or remove the chocks.
5.9.3.2
Disconnect brake and feed line
WARNING
Risk of crushing, cuts, becoming entangled, being drawn in and
risk of impact to people if the machine rolls due to the service
brake system being released!
Always disconnect the hose coupling of the feed line (red) first and
then the hose coupling of the brake line (yellow).
The machine's service brake system only moves to brake position if
the red hose coupling is disconnected.
It is imperative to observe this order, as otherwise the service brake
system will be released and the non-braked machine may start to
move.
When the machine is unhitched or torn off, the feed line connected to
the trailer brake valve bleeds. The trailer brake valve automatically
switches over thus actuating the service brake according to the set
braking effect.
1. Secure the machine against rolling. Observe the information in the chapter "
Secure tractor and
machine against accidental starting
and rolling", page 62.
2. Release the hose coupling of the feed line (red).
3. Release the hose coupling of the brake line (yellow).
4. Fix the hose couplings to the blank connections.
5. Close the caps of the hose couplings at the tractor.
