Service and maintenance of machine
130
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
1. Check the oil level in the mixer gearbox via
the lateral compensating reservoir
(Fig. 76/1).
The oil level must be visible between the
two fill level markings (Fig. 76/2) of the
compensating reservoir.
2. Fill gear lubricant oil (see Quantities when
filled and change intervals, p. 128) through
the vent opening into the compensating
reservoir after removal of the vent screw
(Fig. 76/3) if necessary.
Fig. 76
9.5.3.2
Change oil
Shop work
1. Park the machine on even ground.
2. Turn the diesel engine off and secure
the machine against rolling.
3. Place a drip tray (capacity approx. 30
litres) beneath the compensating
reservoir (Fig. 76/1).
4. Remove the vent screw (Fig. 76/3).
5. Unscrew the hose pipe (Fig. 76/4) from
the compensating reservoir.
The gear lubricant oil flows out of the
compensating reservoir into the drip
tray.
6. Refix the hose pipe (Fig. 76/4) to the
compensating reservoir.
7. Place the drip tray beneath the drain
valve (Fig. 77/5) of the mixer gearbox.
8. Hang the oil drain hose (Fig. 78/6) into
the drip tray.
9. Remove the cap (Fig. 77/5, Fig. 78/5)
from the drain valve.
10. Screw the end of the oil drain hose onto
the drain valve by means of the union
nut (Fig. 78/7).
Fig. 77
