Safety instructions
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
43
when wearing your personal protective equipment,
with greatest possible care. Beware of the cutting knives’ position at the mixing auger!
When using electrical tools, the connecting cables must not be moved over sharp-edged cutting
knives!
3.5.10
Service and maintenance of machine
Carry out the required service and maintenance work on the machine in due time!
Observe the maintenance intervals for wearing parts!
Secure the tractor against accidental starting and rolling before carrying out any service or
maintenance work on the machine or climbing onto the machine!
Existing mechanical, hydraulic, pneumatic and electrical or electronic residual energies may
cause accidental machine movements!
Beware of existing residual energies in the machine when carrying out maintenance work.
Warning signs mark the components with residual energies.
Fix larger assemblies carefully to lifting equipment and secure them before replacing larger
assemblies!
Secure the lifted machine or lifted machine parts against accidental lowering before carrying out
service or maintenance work on the machine!
Regularly check screws and nuts for tightness! Retighten loosened screws and nuts!
Check unscrewed joints for tightness. After finishing maintenance work, check the safety and
protective devices for proper functioning!
Use appropriate equipment and gloves when replacing working tools with blades!
Disconnect the generator and battery cable on the tractor before carrying out electrical welding
work on the tractor and/or on the attached/hitched machine!
Dispose of oils, greases and filters properly!
Properly handle and dispose of substances and materials used for cleaning the machine,
especially:
when working on lubrication systems and devices,
when carrying out cleaning work with solvents!
Spare parts must at least comply with the specified technical standards of the manufacturer! This
is guaranteed when using original parts!
3.6
Warning and instruction signs
The following warning and instruction signs are attached to the machine:
●
Warning signs: They mark dangerous spots on the machine and warn about
residual risks, which cannot be completely eliminated due to the machine’s
operational safety.
●
Instruction signs: They include information referring to proper use of the machine.
Keep these signs always in a clean and clearly legible condition! Replace illegible
signs. Order the warning and instruction signs according to their order number:
●
from the dealer,
●
directly via the Strautmann spare parts warehouse, phone: + 49 (0) 5424 802-30.
