Service and maintenance of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
125
CAUTION
Risk of cutting and crushing fingers and hands and even of bone
fractures if tools are attracted to the magnet!
Risk of cutting fingers and hands when removing sharp-edged
or pointed foreign objects from the magnetic system!
Therefore observe the following in particular when cleaning the
magnetic system:
Always wear cut-resistant protective gloves.
Exclusively use non-magnetic tools, e.g. made of wood or plastic.
Do not put your free hand onto the magnet.
1. Completely open the discharge door
through which you want to enter the mixing
container.
2. Secure tractor and machine against
accidental starting and rolling, for details
please refer to the chapter "
Secure tractor
and machine against accidental starting
and rolling", page 62.
3. Strip the propeller shaft off the tractor's
p.t.o. shaft allowing you to manually rotate
the mixing auger via the propeller shaft if
necessary.
4. Rotate the mixing auger such that the
cutting knives are directed away from the
discharge opening.
5. Unscrew the screwed connections (1)
between protective cover (2) and mixing
container (3).
6. Remove the screwed connection (4) of the
swivel pin and take off the protective cover
(2).
7. Enter and leave the mixing container
carefully through the discharge opening or
the crossover conveyor and the discharge
opening.
8. Carefully clean the mixing container from
installation material or grinding residues
before leaving the mixing container.
9. Ensure that all components, tools etc. are
removed from the mixing container.
10. Properly fix the protective cover (2) again at
the mixing container after finishing all
necessary work in the mixing container.
Fig. 74
