Commissioning
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
79
5.9.1.2
Disconnect hydraulic brake system
1.
Apply the parking brake.
2.
Relieve the brake hydraulics. Swivel operating element at the control device on the tractor to
“Lowering“ position such that the hydraulic oil flows back to the tractor.
3.
Disconnect the hydraulic plug.
4.
Use the dust cap to protect the hydraulic plug against soiling.
5.
Put the hydraulic brake line onto the hose holder.
5.9.2
Automatic reverse overrun brake system
Optional extra
The automatic reverse overrun brake:
serves as service and as parking brake,
is licensed for machines with a gross vehicle weight rating of 8 t and an admissible maximum
speed of 25 km/h determined by its design.
The automatic reverse function permits direct reversing of the
machine, as there will be no braking effect with the wheels
running backwards.
Particularly beware when travelling on extreme uphill gradients.
In case of tractors with insufficient power or spinning tractor
wheels, the combination of tractor / machine risks to be pulled
back down the hill by the charged machine. When reversing, the
machines can only be slowed down by means of the hand brake
lever.
(1) Hand brake lever
serves as parking brake for the
unhitched machine
is used for slowing down the machine
during reverse travel
(2) Pawl for locking the applied hand brake
lever
(3) Push button for releasing the applied hand
brake lever
(4) Pneumatic spring, automatically retightens
the applied hand brake lever if the machine
rolls backwards
(5) Contact breaking cable, serves to actuate
the hand brake lever from the tractor
(6) Hand brake lever (1) is released
(7) Hand brake lever (1) is applied
Fig. 41
