Commissioning
98
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
tailgate while removing the two locking
bolts (5).
6.2 Unlock and remove the two locking
bolts (5).
The tailgate swivels downwards /
backwards (Fig. 71).
7. Insert the two locking bolts (5) into the
upper boreholes of the side bars (6) and
secure them.
Thus, the tailgate cannot swivel forward
again.
8. Fasten both receiver pipes (7) in the front
borehole (8).
9. Remove both locking bolts (9) from each
receiver crossbeam (10).
10. Insert one locking tube (11) each at the
front of the crossover conveyor.
11. Lift the crossover conveyor above the
locking tubes and put the crossover
conveyor down onto the pulleys in upright
position.
12. Roll the crossover conveyor beneath the
transport floor such that the receiver
crossbeams (10) can take up the crossover
conveyor.
13. Lift the crossover conveyor into the receiver
crossbeams.
14. Secure the crossover conveyor in each
receiver crossbeam (10) by means of the
two locking bolts (9).
15. Insert the locking tubes (11) at the bottom
of the crossover conveyor.
16. Remove the locking bolt from each locating
hook (12).
Fig. 71